The following manuscripts will be appeared in 15 September 2026 as Vol. 8, Issue No. 2.

No. 1. The Effect on Electrophysiology Pattern After Electronic Near Task

Saiful Azlan Bin Rosli^{1, 2}, Annera Lea Banus³ and Ahmad Mursyid Bin Ahmad Rudin^{1, 2,} *

¹Centre of Optometry, Universiti Teknologi MARA, Selangor, Malaysia.

²Optometry and Visual Sciences Research Group (iROViS), Universiti Teknologi MARA, Selangor, Malaysia.

³Carl Optometrist, Ranau, Sabah, Malaysia.

^*Corresponding author: mursyid@uitm.edu.my, ORCiD: 0009-0007-3954-5699

https://doi.org/10.33093/jetap.2026.8.2.1, pp. 1-8.

Manuscript Received: 11 September 2025, Revised: 7 October 2025, Accepted: 2 January 2026, Published: 15 September 2026

No. 2. Smart Insole with Deep Learning for Real-Time Classification of Gait Abnormalities

Nur Rabiatul Adawiyah Veran, Ainnur Natasha Jamri and Anas Mohd Noor*

Faculty of Electronic Engineering & Technology, Universiti Malaysia Perlis, Arau, Malaysia.

^*Corresponding author: anasnoor@unimap.edu.my, ORCiD: 0000-0002-0410-3635

https://doi.org/10.33093/jetap.2026.8.2.2, pp. 9-15.

Manuscript Received: 3 August 2025, Revised: 23 September 2025, Accepted: 2 January 2026, Published: 15 September 2026

No. 3. Success Factors Impacting Artificial Intelligence Adoption - Perspective from The Telecom Industry in Malaysia

Suvitha Palani, Siva Priya Thiagarajah^* and Farzana Sharmin Nila

Faculty of Artificial Intelligence & Engineering (FAIE), Multimedia University Cyberjaya, Cyberjaya, Selangor

^*Corresponding author: siva.priya.thiagarajah@mmu.edu.my, ORCiD: 0000-0002-0024-7279

https://doi.org/10.33093/jetap.2026.8.2.3, pp. 16-25.

Manuscript Received: 13 August 2025, Revised: 28 SeptemberMon 2025, Accepted: 14 November 2025, Published: 15 September 2026

No. 4. Real-Time Performance Assessment of Process Control in Aluminium Wire Manufacturing Using Siemens S7-1200

Mya Thu Zar Moe^* and Win Kyaw Myint

¹Department of Electrical Power Engineering, West Yangon Technological University, Yangon, Myanmar.

^*Corresponding author: myamoethu111@gmail.com, ORCiD: 0009-0008-5637-3128

https://doi.org/10.33093/jetap.2026.8.2.4, pp. 26-31.

Manuscript Received: 15 August 2025, Revised: 12 November 2025, Accepted: 25 November 2025, Published: 15 September 2026

No. 5. Utilisation of Response Surface Methodology to Optimise Bandgap and Resistance of Nickel Oxide using The Sol-gel Method

Nurbahirah Norddin^{1, 2, 4, *}, Suhaidi Shafie^{2, 3}, Muhammad Idzdihar Idris¹, Xinzhi Liu^{2, 3}, Ismail Lawal^{2, 3} and Mohd Nizar Hamidon^{2, 3}

¹Faculty of Electronics and Computer Technology and Engineering, Technical University of Malaysia Melaka (UTeM), 75450 Melaka, Malaysia.

²Department of Electrical and Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia.

³Institute of Nanoscience and Nanotechnology, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia.

⁴Faculty of Electrical Technology and Engineering, Technical University of Malaysia Melaka (UTeM), 75450 Melaka, Malaysia.

^*Corresponding author: nurbahirah@utem.edu.my, ORCiD: 0000-0002-4687-1413

https://doi.org/10.33093/jetap.2026.8.2.5, pp. 32-40.

Manuscript Received: 18 August 2025, Revised: 14 November 2025, Accepted: 20 December 2025, Published: 15 September 2026

No. 6. Design and Development of Shrimp Paste Mould

Muhammad Ikman Ishak^{1, *}, Muhammad Izhar Ali¹ and Noor Alia Md Zain²

¹Fakulti Kejuruteraan & Teknologi Mekanikal, Universiti Malaysia Perlis (UniMAP), Kampus Alam UniMAP, Pauh Putra, 02600 Arau, Perlis, Malaysia.

²Fakulti Kejuruteraan & Teknologi Elektronik, Universiti Malaysia Perlis (UniMAP), Kampus Alam UniMAP, Pauh Putra, 02600 Arau, Perlis, Malaysia.

^*Corresponding author: ikman@unimap.edu.my, ORCiD: 0000-0003-0729-6599

https://doi.org/10.33093/jetap.2026.8.2.6, pp. 41-50.

Manuscript Received: 26 August 2025, Revised: 2 December 2025, Accepted: 20 December 2025, Published: 15 September 2026

No. 7. Development and Testing of A Mini Coin Sorting Machine

Ikhwan Hafiz Bin Hayaroni, Mohd Fahmi bin Md Salleh, Muhammad Amir bin Mat Shah and Ab Aziz bin Mohd Yusof^*

Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM) Cawangan Johor, Masai, Johor, Malaysia.

^*Corresponding author: abaziz86@uitm.edu.my, ORCiD: 0000-0002-9700-0714  

https://doi.org/10.33093/jetap.2026.8.2.7, pp. 51-57.

Manuscript Received: 3 November 2025, Revised: 2 December 2025, Accepted: 20 December 2025, Published: 15 September 2026

No. 8. Integration of Multiplication and Floating-Point Extensions in Risc-V: Design and Synthesis

Tasigen Visvanathan, Chu Liang Lee^*, Kah Yoong Chan and C. Senthilpari

Faculty of Artificial Intelligence and Engineering (FAIE), Multimedia University, Cyberjaya, Malaysia.

^*Corresponding author: cllee@mmu.edu.my, ORCiD: 0009-0004-6837-1163

https://doi.org/10.33093/jetap.2026.8.2.8, pp. 58-69.

Manuscript Received: 15 July 2025, Revised: 6 September 2025, Accepted: 13 January 2026, Published: 15 September 2026

No. 9. Harnessing Magnetism: Cutting-Edge Applications and Scientific Advancements

Le Hoang My¹, Debora Smoorna Rongdi¹, Firas Labeed Al-amri¹, Evyan Yang Chia-Yan², Lau Kam Sheng³, Eric Su Han Chan⁴ and Chin Fhong Soon⁵

¹School of Foundation Study, Nilai University, 71800 Nilai, Negeri Sembilan, Malaysia.

²Department of Research and Innovation, Nilai University, 71800 Nilai, Negeri Sembilan, Malaysia.

³Department of Applied Physics, Faculty of Science and Technology, National University, 43600 Selangor, Malaysia.

⁴Faculty of Pharmacy and Biomedical Science, MAHSA University, 42610 Jenjarom, Selangor, Malaysia.

⁵Faculty of Electrical and Electronics Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat, Johor, 86400, Malaysia.

^*Corresponding author: evyanyang@nilai.edu.my, ORCiD: 0000-0003-0619-1103   

https://doi.org/10.33093/jetap.2026.8.2.9, pp. 70-78.

Manuscript Received: 1 July 2025, Revised: 6 September 2025, Accepted: 13 January 2025, Published: 15 September2026